CURING OVEN
SUN FOODS EQUIPMENTS offer a range of Curing Ovens that are ideally suited for the curing of composite materials.
The Curing Ovens are constructed from a powder coated heavy duty tubular frame fitted with painted panels. The interior chamber is made from mild steel coated with aluminium, with stainless steel chambers available as an option.
Each Curing Oven is fitted with a microprocessor digital controller with dual display of set point and actual temperature as standard.
Alternative controllers are available on request.
All Curing Ovens have fan circulation and are heated by sheathed incoloy elements around the fan.
A range of safety features including spark proofing, fume extraction and explosion relief panels are available on request.
Varies types of curing oven
1) ELECTRICAL CURING OVEN
This heat treating Oven are used for a variety of heat treating applications. Precision microprocessor based temperature controls and energy-saving insulation maximize the performance of these rugged units built for long, hard, continuous use.
Specification
Work Space Dimension (W x D x H) -: 3600 X 1200 X 1000
Outside Dimension (W x D x H) -: 4500 x 1500 x 1500
Door Type -: Double Door Leaf type
Temp. Max -: 100 0C
Temp. Oper. -: 900C
Heating /Cooling Rate -: 30C/minute
Insulation -: 100 mm rock wool
Air Circulation -: By B.C.Impellerpressure directly driven by 2 HP Motor
2) GARMENT CURING OVEN (L. P. G. GAS HEATED)
MODEL -: CO 60G
RANGE -: 60 Pants at a time
OVEN DIMENTION
WORK SPACE INNER -: 64” X 90” X 70” (W X D X H)
OUTER -: 72” X 101” X 89” (W X D X H)
3) PRECISION LACQUER CURING OVEN
SFE precision 250º Degree Oven Batch Type
Inside Size -: 450 x 450 x 450 W D H
Outside Size -: 800 x 600 x 800
Temp. Opera. -: 225º C
Temp. Max. -: 250º C
Insulation -: 75mm Thick Glass wool compacted to 96 kgs. Density. With Felt Gasket
4) EPOXY RESIN CURING OVEN
Application -: To cure Epoxy/Resin applied on fabricated sheet metal parts
Job -: Sheet Metal Parts to be cured at 120°C
Rate of production -: 500pieces/hour @ Loading Density of 54 pieces per square feet of
Product size -: Approximately 26 x32 mm
Curing Time -: 30 Minutes
Curing Temp. -: 120C
Firing Media connection -: Electric Conceal Tubular Heaters 7 KW 230 VAC in star
Type of Oven -: Continuous Conveyor
Inside Size Clear -: 2mtr L x 100mm H x 300mm W
Insulation -: 100 mm Glass wool/Mineral wool/ Density 96 kgs/mtr.cu.
Body -: Fabricated out of Heavy Duty Angle and Floating Type Double Body
Conveyor Drive -: 1/2 HP dc with Gear Reduction
Structure -: Oven Body will be floating Body type. The Body & the Conveyor will be Mounted on a Heavy structure of 3.2 mm M.S.
Drive -: 1/2 HP DC Motor with suitable Gear Box with chain drive to main Roller Chain.
Insulation:
Glass wool / Rock wool / Mineral Wool / 150 mm thick of 96 Kgs / mtr C
Heater:
Concealed S.S. Tubular with GI fin with Heat output of 6 to7 KW
5) POWDER CURING OVEN
Type -: Conveyorised type, Infra Red Oven.
Overall Dimensions -: (900 + 600) x 3000 x 700 (W x D x H) mm 600 being width of the heater box on side.
Article Cutout -: Not Given. Normally open.
-: Not Given (W x H) mm max. Sliding door fully open.
Thermal Rating -: 30Kw max.
Heat Source -: Medium Wave Infra Red Heater
Blower -: 500CFM mtr. Cu. per Hr. x 1 Nos.
Blower Motor -: 1 HP x 1 Nos.
Insulation -: 150 mm Resin Bonded wool.
Max. Temperature -: Will depend of Distance between object and Infra Red heaters
Finish -: Powder coated outside, ALHR inside.
Oven construction:
Oven has a strong outer frame of 200 x 200 mm fabricated angles. In this frame insulation cassettes with 150 mm resin bonded wool insulation having inner and outer walls of CRCA sheets will be fitted. Another angle frame will lock the cassettes from inside. This construction allows any further extension, modification easily. Also due to this construction, cassette expansion at high temperature is compensated and sheet war page due to thermal shocks is minimized. Thicker insulation gives less heat losses and fuel saving. Heater box generally will be of top mounting type and incorporate centrifugal blowers for air circulation, Heat exchanger and Burner.
Photograph of similar oven:
6) NON STICK COATING CURING OVEN
Application -: To cure Non Stick Coating applied on Aluminium metal parts
Job -: Sheet Metal Parts to be cured at 450°C
Rate of production -: 20 pieces/hour @ 500 pieces per Day
Curing Time -: 10 to 30 Minutes
Curing Temp. -: 450C
Firing Media -: Electric Conceal Tubular Heaters 78 KW 230 VAC in star
Type of Oven -: Continuous Conveyor Two stage Heating 20’ Cooling 10’ Buffer
Inside Size Clear -: 42’ (20’HZ+6’BZ+10’CZ+2.5’Roller+3’o/p) L x 11” H x 39” W
Outside Size -: 50” W X 42’L X 57” H with Panel 6’.3”
Insulation -: 100 mm Glass wool/Mineral wool/ Density 96 kgs/mtr.cu.
Body -: Fabricated out of Heavy Duty Angle and Floating Type DoubleBody
Conveyor Drive -: AC Drive with Gear Reduction
Control Panel -: Complete Electrical cum Instrumentation Panel. Dust proof control panel housing PhaseIndication lamp. Voltmeter Ammeter PID temperature controllers & Indicators.Thyristor for drive motor. Neatly wired, lugged & terminated.
Safety Systems -: Over temperature.
Conveyor -: Conveyor mesh S.S. 304On
StageVoltage -: Supply 415 V
Structure -: Oven Body will be floating Body type.The Body & the Conveyor will be mounted on a Heavy structure of 3.2 mm M.S. Channel.The Inside Body will 1mm thick S.S. Sheet &outside 1 mm thick MS.
Drive -: 2 HP DC Motor with suitable Gear Box with chain drive to main Roller Chain.
Plenum Chamber -: Chamber on top & Bottom Fabricated out of 1 mm M.S Sheet with Air knifes.
Paint -: Structure suitable pretreated, 2 coals of primer & suitable High temp Paint.
Insulation -: Glass wool / Rock wool / Mineral Wool / 150 mm thick of 96 Kgs / mtr C
Heater -: Concealed S.S. Tubular with GI fin with Heat output of 78 KW + 10.5 HP Drive