Inert Atmosphere Oven

Inert atmosphere ovens for operation at up to 400˚C. Protect parts from oxidation using any non-flammable gas such as Nitrogen, Argon or Carbon Dioxide. Front to back horizontal airflow completely surrounds work on shelves or large parts placed directly on the optional reinforced workspace bottom. Includes cooling jacket, which can be equipped with optional cooling atmosphere purge solenoid, cooling blower and programming temperature controller provides completely automatic sequencing.

Controls
– Digital, microprocessor based, thermocouple actuated,   indicating temperature controller
– Motor control push buttons
– On-off heat switch
– Easy-to-see pilot lights

Safety Equipment
– Adjustable, thermocouple actuated, manual reset excess   temperature controller
– Separate heating element control contactors
– Re circulating blower air flow safety switch.

Construction
– All interior seams welded gas-tight
– All wall penetrations welded at inside and fitted with   compression fitting at outside of oven.
– Inner oven walls extended through oven throat area to   seal directly against silicone rubber door seal
– 2-point cam action positive latching door hardware
– Adjustable offset door hinges to guarantee tight closure   of   door seal
– Exterior blower shaft seal
– Inert atmosphere inlet with pressure regulator to   maintain   positive pressure within oven
– 0-100 CFH atmosphere flow meter
– Pressure gauge to indicate interior oven pressure
– Inert atmosphere outlet with pressure relief
– Air jacket on inner oven for cooling
– 304 stainless steel interior
– Aluminized steel exterior with enamel finish
– Brushed stainless steel control panel face
– 10 lbs./cf. density industrial rock wool insulation
– Built-in baffles prevent radiant heat
– Two (2) nickel plated wire shelves
– Channel shelf supports prevent shelves tipping