Photostability Chamber

We manufacture, export and supply our clients a wide assortment of highly durable Photo stability Chamber. Offered chamber is mostly used in hospitals, research labs and biological industry for preservation of micro-organisms, blood sample, etc. This chamber is manufactured in accordance with the set industry norms and is thoroughly tested on different quality parameters. This Photo stability Chamber is available in various technical specifications as per the need of clients at an affordable rate.

SUN FOOD EQUIPMENTSManufactures, and supplies to its clients a wide assortment of highly durable Photo stability Chamber that is precisely designed to carry out test on fluorescent lamps in order to validate the light intensity level and offer an accurate measurement of light. Photo stability Chamber is outfitted with user-friendly interface to control light and temperature situations as well as to ensure uniform distribution of light and better intensity level in order to answer to degradation. Offered chamber is mostly used in hospitals, research labs and biological industry for preservation of micro-organisms, blood sample, etc. This chamber is manufactured in accordance with the set industry norms and is thoroughly tested on different quality parameters. This Photo stability Chamber is available in various technical specifications as per the need of clients at an affordable rate. Moreover, it features uniform UVA Light reflection and accurate spectral power distribution.

• Construction-: Double walled construction with backside triple.
• Insulation-: 3 inch Thick PUF Insulation ensures stable temperature with humidity & reduced energy consumption.
• Observation Door-: Full view observation Acrylic door with gasket to observe sample inside the chamber.
• Heating System-: High quality S.S. Tubular Heaters are used for better heating.
• Air Circulation -: Motorized Blower at back side of the chamber develops unique air flow system which ensures maximum uniform temperature humidity condition inside the chamber. Unique air flow assures quick recovery after door openings
• Humidity System-: Steam injection humidity system none condensing, with water level arrangement.
• Blower Motor-: 1/12 HP, TEFC, F-class insulation, Single Phase, 1440 RPM, 230 Volts.
• Photo Stability Effects-: Fluorescent tube for day light effect and UV tubes for Ultra Violet ray in accordance to the ICH guidelines requirement of a lightning energy mounting to 1.2 mil lux per hours and integrated UV energy share of 200 Watt Hours per mtrs².
• Safety Features-: 1) Additional safety thermostat to cut of dry heater supply in case temperature of overshoot. 2) Float switch to cut off the wet heater supply in case of low water level in the reserve tank. Audio & Visual alarm. 3) Compressor ON delay timer (2min) to safe guard the compressor.  4) In built over load protector provided for hermetically sealed compressor. 5) After opening the Door UV light automatic switch off.
• Refrigeration System -: By means of CFC Free hermitically sealed Emerson Copland make compressor with R 134 A  for better cooling with ECO friendly refrigerant with time delay to safe guard compressor system.
• Validation Port-: 50 mm validation port hole with silicone rubber seal to insert sensors for validation.
• Supply -: 230 V AC, Single Phase , 50 Hz
• Trays – : Specially designed Stainlesssteel Rod trays ensure uniform temperature distribution.
• Standard Model -: Inside S.S.304 mirror finish & Outer Mild steel (CRCA) sheet with powder coated.
• Temperature Range -: 20°C to 50°C
• Temperature Accuracy -: ± 0.2° C.
• Temperature Uniformity -: ±1° C.
• Humidity Range -: 40% to 90%
• Humidity Accuracy -: + 2%
• Humidity Uniformity -: ± 3%
• Temperature Control System-: Imported Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value.
• Humidity Control System-: Imported Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value with direct % RH. Direct RH electronic capacitor type humidity sensor, avoid wick cup & water.

1. Place the chamber where ventilation is good.
2. The chamber must be operated in an ambient of 22◦ C ~ 30◦ C.
3. Leave minimum 300 mm. Space from the sides and leave 600 mm. Space from the backside.
4. Place the chamber horizontally levelled.
5. Give stabilized electric supply (230V ±5%, 50Hz, 1 Phase, 20 Amp). It is recommended to use a voltage stabilizer (KVA).
6. Proper grounding of the chamber to get satisfactory operation of chamber.
7. Do not use pump water, pressured water or hot water for water connection. Water supply from an overhead water tank where the water pressure should not be more than 15 PSI is recommended.
8. Use of soft water or D.M. water for humidity formation is recommended. Use of hard or salty water will damage the boiler heater.
9. Do not test any product in the chamber, which is capable of generating combustible mixtures.